- A+
Introduction
Replacing and resetting the toner cartridge in your Brother MFC7480D printer is not a complicated process. In this article, we will guide you through the step-by-step process of how to replace and reset the toner cartridge in the MFC7480D printer.
Step-by-step guide to replace the toner cartridge
Follow the below steps to replace the toner cartridge:
Turn off the printer and wait for it to cool down.
Open the front cover of the printer and pull out the toner cartridge assembly.
Push down on the green lock lever on the left side of the cartridge and remove the old cartridge.
Unpack the new cartridge and gently shake it to distribute the toner evenly.
Remove the protective cover from the new cartridge.
Insert the new cartridge into the printer and make sure it is securely seated in place.
Push the green lock lever down to secure the new cartridge.
Close the front cover of the printer.
Resetting the toner cartridge counter
After you replace the toner cartridge, the printer will continue to display a message that the toner cartridge needs to be replaced. To reset the toner cartridge counter, follow these steps:
Turn on the printer and wait for it to warm up.
Open the front cover of the printer.
Press the Clear/Back button on the printer's control panel.
The printer will display a message asking if you want to replace the drum unit. Press the Up arrow key to select Yes and then press OK.
The printer will display a message asking if you want to replace the toner cartridge. Press the Up arrow key to select Yes and then press OK.
The printer will display a message asking if you have replaced the drum unit. Press the Up arrow key to select No and then press OK.
The printer will reset the toner cartridge counter and the message will disappear.
Close the front cover of the printer.
Conclusion
Replacing and resetting the toner cartridge in your Brother MFC7480D printer is a simple process that you can do yourself. Just make sure you follow the above steps carefully, and you'll have your printer up and running in no time.
