- A+
Brother Printer DCP-7055 Toner Reset Guide
If you own a Brother Printer DCP-7055, then you know that the toner cartridge needs to be replaced periodically. However, did you know that after replacing the cartridge, you may still be dealing with a toner low warning message? This is not uncommon and can be frustrating. In this article, we will provide you with a step-by-step guide on how to reset the toner on your Brother Printer DCP-7055 and get rid of that pesky warning message.
Step 1: Verify Toner Cartridge Replacement
Before resetting the toner on your printer, make sure that the toner cartridge has been replaced with a new one. If you have not yet replaced the old toner cartridge, then go ahead and do so. Once the old cartridge has been replaced, close the front cover of your printer.
Step 2: Enter Maintenance Mode
To reset the toner on your Brother Printer DCP-7055, you will need to enter maintenance mode. To do so, make sure that the printer is switched on. Next, hold down the "menu" button for a few seconds until the LED display shows "Maintenance." Release the "menu" button and use the arrow keys to select "Reset toner." Press "OK" to continue.
Step 3: Reset Toner
Once you have selected "Reset toner," the printer will display a message asking if you want to reset the toner. Use the arrow keys to select "Yes" and press "OK." The toner will now be reset, and the printer should display a message confirming that the toner has been reset.
Step 4: Exit Maintenance Mode
Finally, to exit maintenance mode, simply press the "Stop/Exit" button. Your printer will now be in normal mode, and the toner warning message should be gone.
Conclusion
Resetting the toner on your Brother Printer DCP-7055 is a simple process that can save you both time and money. By following the steps outlined in this guide, you can easily reset your toner and get rid of that pesky warning message. So, the next time you change your toner cartridge, remember to reset it to keep your printer running smoothly.
