- A+
Brother J3930dw Disassembly: A Detailed Guide in Pictures
The Brother J3930dw is a popular all-in-one printer that is widely used in home and office settings. While it's a reliable workhorse, there may come a time when you need to take it apart for cleaning, maintenance, or repair. If you're not sure where to start, this guide will take you step-by-step through the disassembly process, with pictures to help you along the way.
Step 1: Remove the Paper Tray
The first step in disassembling the Brother J3930dw is to remove the paper tray. Simply pull out the tray and set it aside.
Step 2: Open the Scanner Cover and Remove the Scanner Glass
Next, open the scanner cover and remove the scanner glass by gently lifting it out of the slot. Set it aside in a safe place.
Step 3: Remove the Top Cover
With the scanner glass out of the way, you can now remove the top cover. Start by removing the two screws on the back of the printer that hold the cover in place. Then, gently pull the cover forward and lift it off the printer.
Step 4: Remove the Control Panel
Once the top cover has been removed, you can access the control panel. Carefully unplug the cables that connect the control panel to the printer, and then unscrew the control panel from the printer. Set it aside.
Step 5: Remove the Side Panels
The next step is to remove the side panels. Start by removing the screws that hold the panels in place. Then, gently pull the panels away from the printer to release them.
Step 6: Remove the Rear Cover
With the side panels off, you can now remove the rear cover. Start by removing the two screws that hold the cover in place. Then, gently pull the cover away from the printer to release it.
Step 7: Remove the Ink Cartridges
With the printer fully disassembled, you can now remove the ink cartridges. Simply press down on the tab on each cartridge and slide it out of the printer.
That's it! You've successfully disassembled your Brother J3930dw printer. Now you can clean, maintain, or repair it as needed.
