- A+
Brother HL-3160 Drum Unit Replacement
If you own a Brother HL-3160 printer, you may eventually need to replace the drum unit. The drum unit is an essential component of the printer that is responsible for transferring toner to the paper, creating crisp and clear images and text. Over time, the drum unit will wear out and may need to be replaced to maintain optimal print quality. In this article, we will walk you through the process of replacing the drum unit in a Brother HL-3160 printer.
Step 1: Gather the Necessary Supplies
Before you begin, it is important to gather the necessary supplies for the drum unit replacement. You will need a new Brother DR-253CL drum unit, a soft lint-free cloth, and possibly a Phillips head screwdriver. Make sure to order the correct drum unit for your specific printer model.
Step 2: Open the Printer Cover
The first step in replacing the drum unit is to open the printer cover. Lift up on the front cover to reveal the toner cartridges and drum unit. On the front of the drum unit, there is a blue locking lever that needs to be released before the unit can be removed.
Step 3: Remove the Old Drum Unit
Once the locking lever is released, the drum unit can be easily pulled out of the printer. Gently pull the unit by the handle, making sure not to touch the drum surface. Set the old drum unit aside, and dispose of it properly according to the manufacturer's instructions.
Step 4: Prepare the New Drum Unit
Before installing the new drum unit, remove it from the packaging and remove any protective covers or materials. Gently shake the unit from side to side to distribute the toner evenly. It is important to avoid touching the drum surface or exposing it to light as this can damage the unit.
Step 5: Install the New Drum Unit
With the new drum unit prepared, it is time to install it in the printer. Carefully align the unit with the guides on either side of the printer and slide it in until it clicks into place. Once the unit is securely installed, close the printer cover and make sure it latches closed.
Step 6: Reset the Drum Counter
After installing the new drum unit, you may need to reset the drum counter to ensure that the printer recognizes the new unit. To do this, locate the "Go" button on the printer's control panel and hold it down for about four seconds until the LED lights blink twice. Release the button and the drum counter should now be reset.
Conclusion
Replacing the drum unit in a Brother HL-3160 printer is a simple process that can help maintain optimal print quality and extend the life of your printer. By following the steps outlined in this article, you can replace the drum unit yourself and keep your printer running smoothly for years to come.
